22B/FV-3F/H Series INTEGRAmotor BLDC Right Angle Hollow Shaft Gearmotor
Search by Specification (Parameter Search)
Filter By:
22B/FV-3F/H Series INTEGRAmotor BLDC Right Angle Hollow Shaft Gearmotor
Application Information
- The stock models in this INTEGRAmotor series will be phased out by the end of 2027 and should not be specified for new OEM applications.
- Integral 24VDC voltage mode PWM controller simplifies installation, minimizes EMI, and reduces wiring cost.
- Featuring PWM voltage control, amplifier enable, direction and dynamic braking inputs. Fault signal output.
- Built-in 256 PPR, two channel quadrature, optical encoder (total 1024 counts/rev).
- Can operate in velocity or position control mode.
Optional Accessories
STANDARD FEATURES
- Higher gear ratios provide self-locking to hold load in place.
- Output torque ratings chosen for long, reliable life.
- Industrial lip type seals on motor and output shafts.
- Ball bearing on output shaft for increased radial load capacity and long life.
- Permanently lubricated gearing utilizing semi-fluid grease for long life and flexible mounting positions.
- Bronze gear for high shock load capability. Hardened and ground worm gear for high strength, long life, and quiet operation.
- Small size takes up minimal space.
- cURus, CE
22B/FV-3F/H Series INTEGRAmotor BLDC Right Angle Hollow Shaft Gearmotor Models
-
Model Number
8765
Speed / RPM
42
Torque
37.0
Motor
1/8
Voltage
24 DC
Gear Ratio
60:1
-
Model Number
8766
Speed / RPM
62
Torque
37.0
Motor
1/8
Voltage
24 DC
Gear Ratio
40:1
-
Model Number
8767
Speed / RPM
125
Torque
35.0
Motor
1/8
Voltage
24 DC
Gear Ratio
20:1
-
Model Number
8768
Speed / RPM
250
Torque
22.0
Motor
1/8
Voltage
24 DC
Gear Ratio
10:1
-
Model Number
8769
Speed / RPM
500
Torque
11.0
Motor
1/8
Voltage
24 DC
Gear Ratio
5:1