Skip to Main Content

Unfiltered SCR DC Basic Speed Control (open chassis)

Search by Specification (Parameter Search)

Torque Units
Speed Units
Power Units

Filter By:

Back

Unfiltered SCR DC Basic Speed Control (open chassis)

Unfiltered SCR DC Basic Speed Control (open chassis)

Application Information

  • Rated for continuous operation in 50° C ambient with no additional heat sink.
  • Drives Bodine 130V and 180V permanent magnet DC motors.
  • Drives 90V and 180V "SCR rated" and 130V "PWM rated" permanent magnet DC motors made by other manufacturers.
  • Connections made to model 0865 with 0.25" quick connect tabs. Seven mating terminals supplied with control. Connections made to model 0866 with pluggable terminal block (supplied with control).

STANDARD FEATURES
  • Operates from 115 Volt AC or 230 Volt AC line, selectable with plug-in jumper.
  • Switchable output for 0-90 Volt DC or 0-180 Volt DC.
  • Back EMF feedback maintains better than 2% speed regulation.
  • Dip switches to easily calibrate control for different motor sizes.
  • Two diagnostic LEDs indicate when power is on and when current output is at limit set by TORQ pot.
  • Six on-board user-adjustable pots for torque limit, minimum speed limit, maximum speed limit, acceleration time, deceleration time and speed regulation.
  • Speed can be adjusted manually using a remote 10K speed pot (included with control).
  • Unfiltered drive draws lower AC line current than comparable SCR filtered controls.
  • Connections for optional user-supplied inhibit switch.

Need help getting started?

We can help you find the best motor, gearmotor, or control for your next design project. Contact us today!