• The stock models in this BLDC Control series with 115VAC input will be phased out and obsoleted before the end of 2024, and should not be specified for new applications.
  
• Operates from 115 Volt AC line.
• Filtered DC output results in cooler operation of the motor.
• Unique Smart Reverse™ circuit allows remote control of motor direction.
• NEMA 12 enclosure for environmental protection.
• Dynamic braking for quicker stops.
• 12 pulse/revolution tach output provides indication of motor speed.
• Red LED indicates control shutdown due to a fault condition.
• Speed can be adjusted manually using a potentiometer on enclosure.
• DIP switches set the current limit so that the same control model can drive any size Bodine motor.
• Inherent closed loop system maintains a 1% maximum change in motor speed from 0-100% of rated load when operated at rated speed.
• Toggle switch on enclosure indicates AC power on/off.
• Lamp on enclosure indicates AC power on.
• Rotary switch on enclosure to select motor direction.
• Fuse holders for line and motor fuses (fuses included).
• AC line cable and motor cable are factory-installed.

 

Application Information

• Rated for 40° C ambient.
  
• Drives 130V Bodine Brushless DC Motors.
• Two ways of mounting: face mounting using self-tapping screws on back surface, or flange mounting by installing four brackets (included).
• Model 3912 for 2500 rpm motors.
• Model 3913 for 10,000 rpm motors.
• The maximum recommended distance between the control and the motor should not exceed 12 ft. (3.5 m).