Tag Archives: Permanent Magnet DC Gearmotors

Bodine Electric Type WX Gearmotors Now Have Higher Torque Ratings

Bodine Electric Type WX Gearmotors Now Have Higher Torque Ratings

Bodine Electric Company recently upgraded the design of many of our type WX gearmotors to increase the output torque ratings while maintaining the same long-life rating. Two parts in the gearhead design were changed to accomplish the higher torque ratings: the rotor/armature shaft and the first stage gear. The rotor is the name for the



 VIEW
BODINE ELECTRIC AT AUTOMATE 2024

BODINE ELECTRIC AT AUTOMATE 2024

Bodine Electric Company exhibited at the AUTOMATE 2024 trade show at McCormick Place in Chicago from Monday, May 6 through Thursday, May 9, 2024. A team of eight people from Bodine’s sales and marketing departments took turns greeting visitors to our booth number 2180 during the four days. AUTOMATE is the largest robotics and automation



 VIEW
Video: How to Connect a PMDC Gearmotor to a Filtered PWM DC Speed Control

Video: How to Connect a PMDC Gearmotor to a Filtered PWM DC Speed Control

In this new How-To video, we are demonstrating how to connect a 130VDC, two-wire PMDC gearmotor to a Bodine WPM PMDC motor speed control powered from a 115VAC/60Hz/1-phase line. In this example, we used a Bodine stock model 6071, type 33A-HG/H, 130VDC hollow shaft gearmotor, powered by a 0-130VDC (out), type WPM Speed control item



 VIEW
Introduction to Motor Constants for Fractional Horsepower Gearmotors

Introduction to Motor Constants for Fractional Horsepower Gearmotors

Motor constants are needed to calculate permanent magnet DC (PMDC) or brushless DC (BLDC or EC) motor specifications and ratings, or to match the motor properly to an amplifier. The motor constants are required in order to predict the PMDC or BLDC motor’s performance with changing variables, such as different input voltages or different loads. (See below PDF



 VIEW
What is a Gearmotor?

What is a Gearmotor?

In our company history, we mention that Bodine Electric is one of the pioneers in the design and development of small (fractional HP = FHP, less than 1 HP) gearmotors in North America. Bodine Electric introduced the first integral gearmotors in the 1920s. Here is a brief discussion on how we define a gearmotor or



 VIEW
Replacing Carbon Brushes in PMDC Gearmotors from Bodine

Replacing Carbon Brushes in PMDC Gearmotors from Bodine

Learn how to replace brushes in our 24A, 33A or 42A PMDC gearmotors and motors.



 VIEW
Bodine CG Gearmotors Lift up to 10,000 Pounds

Bodine CG Gearmotors Lift up to 10,000 Pounds

High Torque 24 VDC gearmotors drive vertical boat lift. A boat lift manufacturer contacted our engineering team to assist in the development of a new high load capacity vertical boat lift. The application demanded that the gearmotor be suitable for long-term use in a harsh waterfront environment, deliver high starting and running torque, positive locking



 VIEW
How to Install a Bodine mod#0984 terminal box to a Bodine AC motor or gearmotor

How to Install a Bodine mod#0984 terminal box to a Bodine AC motor or gearmotor

Installing a Terminal Box onto a Motor/Gearmotor (IP-44) Example: Terminal Box model 0984. Mounting Instructions 07400067E. The motor/gearmotor is factory-installed with a bushing on the lead exit. In order to install the terminal box onto the motor/gearmotor, this bushing must be removed. Unscrew and remove the plastic bushing from the motor/gearmotor’s center ring terminal opening



 VIEW
Our Visit to PackExpo Chicago - October 2018

Our Visit to PackExpo Chicago – October 2018

Always fun to visit PackExpo and to see new gearmotor applications: Conveyors are exhibited in all sizes and shapes. Some are powered by parallel shaft gearmotors, others are powered by right-angle or hollow shaft gearmotors. Both AC and PMDC variable speed and fixed speed… AC Inverters = VFDs = Variable Speed Drives… And our friends



 VIEW
New

New “SCR Rated” Stock Gearmotors Now Available!

In response to the obsolescence of the Baldor-Reliance fractional horsepower (FHP) gearmotor line, we are excited to announce the addition of (80) new 90V and 180VDC gearmotors that are fully compatible with unfiltered SCR speed controls. The gearmotors feature SCR rated windings that run at 2500 RPM armature speed at 90V or 180VDC respectively. The



 VIEW